tpc11ca thru tpc36ca www.vishay.com vishay general semiconductor revision: 09-sep-16 1 document number: 87649 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 surface mount par ? transient voltage suppressors bi-directional 150 0 w tvs in to-277 (smpc) package note ? all electrical characteristics are only applicable when two identical polarity terminals are connected. features ? junction passivation optimized par ? design ?t j = 185 c capability suitable for high reliability and automotive requirement ? very low profile - typical height of 1.1 mm ? ideal for automated placement ? bi-direction only ? excellent clamping capability ? low leakage current ? very fast response time ? aec-q101 qualified available ? - automotive ordering code: base p/nhm3 ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 typical applications use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ics, mosfet, signal lines of sensor units for automotive, consumer, computer, industri al, and telecommunication. mechanical data case: to-277a (smpc) ? molding compound meets ul 94 v-0 flammability rating base p/nhm3 - halogen-free, rohs-compliant, and aec-q101 qualified terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 ? hm3 suffix meets jesd 201 class 2 whisker test polarity: no marking on bi-directional types note (1) non-repetitive current pulse per fig.3 and derated above t a = 25 c primary characteristics v wm 10.5 v to 37.8 v v br (bi-directional) 11 v to 36 v p ppm 1500 w t j max. 185 c polarity bi-directional package to-277a (smpc) to-277a (smpc) esmp ? series terminal 1 terminal 2 maximum ratings (t a = 25 c, unless otherwise noted) parameter symbol value unit peak power dissipation wi th a 10/1000 s waveform (1) p ppm 1500 w peak pulse current with a 10/1000 s waveform (1) i ppm see next table a operating junction and storage temperature range t j , t stg -65 to +185 c
tpc11ca thru tpc36ca www.vishay.com vishay general semiconductor revision: 09-sep-16 2 document number: 87649 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? all terms and symbols are cons istent with ansi/ieee c62.35 (1) v br measured after i t applied for 300 s, i t = square wave pulse or equivalent (2) surge current waveform per fig.3 note (1) aec-q101 qualified electrical characteristics (t a = 25 c, unless otherwise noted) device type device marking code breakdown voltage v br (1) at i t (v) test current i t (ma) stand-off voltage v wm (v) maximum reverse leakage at v wm i d (a) maximum peak pulse surge current i ppm (2) (a) maximum clamping voltage at i ppm v c (v) bi min. max. tpc11ca baf 10.5 11.6 1.0 9.40 5.0 96.2 15.6 tpc12ca bag 11.4 12.6 1.0 10.2 2.0 89.8 16.7 tpc13ca bah 12.4 13.7 1.0 11.1 2.0 82.4 18.2 tpc15ca bai 14.3 15.8 1.0 12.8 1.0 70.8 21.2 tpc16ca baj 15.2 16.8 1.0 13.6 1.0 66.7 22.5 tpc18ca bak 17.1 18.9 1.0 15.3 1.0 59.5 25.2 tpc20ca bal 19.0 21.0 1.0 17.1 1.0 54.2 27.7 tpc22ca bam 20.9 23.1 1.0 18.8 1.0 49.0 30.6 tpc24ca ban 22.8 25.2 1.0 20.5 1.0 45.2 33.2 tpc27ca bao 25.7 28.4 1.0 23.1 1.0 40.0 37.5 tpc30ca bap 28.5 31.5 1.0 25.6 1.0 36.2 41.4 tpc33ca baq 31.4 34.7 1.0 28.2 1.0 32.8 45.7 tpc36ca bar 34.2 37.8 1.0 30.8 1.0 30.1 49.9 ordering information (example) preferred p/n unit weight (g) preferred packag e code base quantity delivery mode tpc11cahm3/h (1) 0.10 h 1500 7" diameter plastic tape and reel tpc11cahm3/i (1) 0.10 i 6500 13" diameter plastic tape and reel
tpc11ca thru tpc36ca www.vishay.com vishay general semiconductor revision: 09-sep-16 3 document number: 87649 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and characteristics curves (t a = 25 c, unless otherwise noted) fig. 1 - peak pulse power rating curve fig. 2 - pulse power or current vs. initial junction temperature fig. 3 - pulse waveform fig. 4 - typical j unction capacitance note ? fig.1 power calculat ion is based on i ppm , times defined maximum clampi ng voltage by pulse width. 0.1 1 10 100 10 100 1000 10 000 p ppm - peak pul s e power (kw) t d -pul s e width ( s ) 0 25 50 75 100 0 25 50 75 100 125 150 175 peak pul s e power (p pp ) or current (i pp ) derating in percentage, % t j - initial temperature ( c) 0 50 100 150 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 i ppm - peak pul s e current, % i r s m t p -time (m s ) t j = 25 c pul s e width (t d ) i s defined a s the point where the peak t d t r = 10 s peak value i ppm half value - i pp /2 i ppm 10/1000 s waveform a s defined by r.e.a. 10 100 1000 10 000 10 100 c j - junction capacitance (pf) v br - breakdown voltage (v) mea s ured at s tand-off voltage, v wm mea s ured at zero bia s t j = 25 c f = 1.0 mhz
tpc11ca thru tpc36ca www.vishay.com vishay general semiconductor revision: 09-sep-16 4 document number: 87649 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) conform to jedec ? to-277a to-277a ( s mpc) 0.016 (0.40) 0.006 (0.15) 0.047 (1.20) 0.039 (1.00) 0.146 (3.70) 0.134 (3.40) 0.087 (2.20) 0.075 (1.90) 0.189 (4.80) 0.173 (4.40) 0.049 (1.24) 0.037 (0.94) 0.053 (1.35) 0.041 (1.05) 0.030 (0.75) nom. 0.084 (2.13) nom. 0.155 (3.94) nom. mountin g pad layout 0.268 (6.80) 0.186 (4.72) min. 0.050 (1.27) min. 0.041 (1.04) 0.055 (1.40) min. 0.189 (4.80) min. 0.187 (4.75) 0.175 (4.45) 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 0.171 (4.35) 0.167 (4.25) 21
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
